electronic ballast EPS8-1500-150 for replace the hanovia EVG65-80W

Use for hanoiva uv lamp 130061-0080-01 uv lamp ,

replace the hanovia ballast EVG65-80W1.5A

Product specification

EPS8-1500-150

input characteristics

•  Rated input voltage: 220V / 230V

•  Rated power supply frequency: 50 / 60Hz

•  Input voltage range: 198 to 305 V

•  Maximum input power: 164W

•  Maximum input current: 0.72A@230V

•  Input power factor PF:> 0.975

•  Complete machine efficiency is η:> 90%

output characteristic

• Load lamp tube: single lamp NNI120 / 79 \ NNI120 / 80 \ NNI120 / 84 \ NIQ120/80\NIQ120/84\TUV115WVHO

•  output:1.35A ~1.55A

•  starting mode:Preheat start, suitable for frequent start Preheating current is 1.35A ~1.65A Pre-heating time is 7S ~9S

•  Light tube status indication function: switch quantity (dry contact), can be connected to the remote device to feedback the working state of the lamp

satisfying criteria:

•  IP type:IP20

• attestation:

going

l Working environment temperature: -15℃ ~40℃

l Humidity: 5%~85%

product mix

l European terminal structure

l Shell material: aluminum

l Installation size: 238mm

l Ballast size: 250 * 65 * 45mm, net weight: 0.56 KG

l Outer box size: 460 * 270 * 190mm, quantity: 18 pcs, Gross weight: 11.5KG

Precautions for use

l Before installing and replacing the ballast

l Wire diameter of 0.5~1.0mm2, The peeling length is 8 to 10 mm

l The connection line between the ballast and the lamp tube shall not exceed 5m

guarantee period

l The shell temperature is 70 degrees and is guaranteed for 2 years